Tuning module for permanent installation in e-bikes / pedelecs with Giant Syncdrive Sport / Pro / Life / Core drive system from model year 2017 to 2022 with the displays EVO, EVO-SG, CHARGE and PLUS, as well as the control units ONE, DASH 2 IN 1-SG, ERGO-SG and ERGO2-SG. 
The device is installed invisibly on the motor from the outside. No cables need to be damaged or modified, the module is simply plugged in.

No PC or smartphone is required. All settings are made via the display on the bike.

Unique is the possibility to set both the speed limit, the downshift behavior and the wheel circumference via the display.

In contrast to the almost complete elimination of the speed limit with other tuning modules, this module still allows a very sporty driving style with moderate battery consumption by slightly increasing the limit, e.g. to 32km/h. For a more natural riding experience, the dynamic mode spreads the downshift over a wider speed range, the so-called "wall effect" is significantly reduced.

Notice:
A display (e.g. PLUS or EVO-SG) or alternatively an app for speed display is required for the initial setup of the tuning and for setting an individual speed limit. You can use the Giant RideControl app for this.

Features

• Tuning can be turned on or off via the arrow keys on the control unit.
• After switching on, the speed limit can be freely set in the range 25 – 99km/h using the arrow keys. The last set value is stored.
• Also works with S-pedelecs or bikes throttled to 20km/h.
• The tuning is always turned off after switching on the bike.
• Setting of a smoother “throttling behaviour” possible (dynamic mode). The otherwise very abrupt cut-off at the speed limit is thereby.
  
  

 

• Adjustment of the wheel circumference possible during setup. 
• Correct display of speed, distance traveled, and average speed at all times.
• Correct total mileage of the bike even after removal of the tuning module, because the kilometers in the engine control are tracked by the tuning module.

Installation

 

Installation in a Stance E+ 0 Pro 2020 with Syncdrive Pro, RideControl One and Ride Control App

Operating the module with RideControl One and Ride Control Plus

Installation in a Full E+ 0 Pro 2017 with RideControl Evo

Installation in a Giant Explore E +1 with Syncdrive Sport and RideControl Evo-SG

 

 

Technical Data

• Housing dimensions: 37mm x 19mm x 9mm (1.46” x 0.75” x 0.36”)
• Cable length: Approx. 140mm (5.5”)
• Weight: 0.025kg (0.9oz)
• Power consumption: 0.1W
• Supply voltage: 5VDC
• WEEE-Reg.-Nr. DE35476192

Scope of Supply

• Tuning module
• Manual

Required Tools

For the installation in a Full E+ 0 Pro you need:

• Torx wrench TX20 / TX25 / TX30
• Allen key 6mm
• ISIS crank puller
• Lockring tool for Giant / Yamaha PW-X
• Chain whip (optional)

The required tool may differ for other models!

 

Legal and safety infromation / product liability

• Operation of the e-bike on public roads is no longer permitted after installation of the module. Use is only permitted on private property or on designated test and race tracks.
• Damage caused in connection with the operation of the e-bike is no longer covered by private liability insurance after installation.
• Liability, warranty and guarantee claims against the dealer or manufacturer of the E-bike expire or are severely restricted.
• The e-bike is subject to higher mechanical stress due to operation at higher speeds. This results in additional safety risks.
• The installation and operation of the module is at your own risk. The manufacturer accepts no liability for damage associated with the installation and operation of the device.
• Please inform yourself about possible further technical and legal consequences before installing the device.